Pièces de rechange & accessoires

Certain BOA systems have a small allen key hole in the knob. To replace the BOA cable or knob, you need to unmount the knob. To do this you need a tiny allen key. If you do not have this, our BOA allen key will do the job. Tork wrench in grey or Hex wrench in yellow (allen key) En savoir plus

One replacement strap for Flow Fuse bindings with Fusion strap. This strap is for the clip side (inner side) Sold per piece without washer and screw Fits NX2 and Fuse bindings Washer sold as pictured (not included) - 28 tooth - Scales 1 to 12 on front side En savoir plus

Set of 8 screws and washers All snowboards and snowboard bindings use the same diameter screw, which is size M6, with the same size thread. The only thing which varies is the length of the screw. It is the thickness of your binding baseplate which determines what length screw you require. This varies from manufacturer to manufacturer and from binding to binding. The make and model of your snowboard is irrelevant because, thankfully, they all use the same inserts. To measure the length of a screw, measure from the threaded tip up to the widest point on the the circumference of the screw head. 12 mm. As used by many K2 and Ride Bindings. NB Our screws come with washers. K2 and Ride bindings tend not to use the washers so just chuck 'em away! 14 mm. This is the 'standard' size suitable for most makes of binding, including older models of Burton and 2007 Flow NXT bindings and all Flow bindings 2008 onwards. 16 mm. Most Burton bindings. 18 mm. All Flow bindings pre 2008 - except Team and NXT En savoir plus

Nitro spare part for many bindings. This part is from the toe clamp side, not on the ratchet side. Sold per piece. Including the mounting pin. - 28 tooth - 15 cm long - sold per set - Pin included (NEW - different from picture) En savoir plus

Nitro Raiden spare part for many bindings. This part is from the toe clamp side and has a steel cable from front to end to prevent breaking. Excluding the mounting pin (18097). If you lost this pin or it's broken and you want to replace the straps you have to buy the pins too. NOTE: This is the strap for the clamp side, not for the ratchet side! ART CODE 33071-H - 15 teeth - 10.3 cm long - 7 mm x 103 mm x 19 mm - sold per piece En savoir plus

Choose length of the cable. Size should be on the inside of the tongue of your boots. For the H2 BOA systems with a hole in the dial knob's "O" you need a small allen key to remove the knob and be able to replace the cable. For M3 BOA systems you need the torque version (grey). If you don't have this tool, you need to buy this too (available in this section) Search art code 19918 BOA Mounting tool in this section. Advice: make pictures of your demount with your mobile for later reference. Some BOA sytems are more complicated then others. Search youTube for instruction movies. En savoir plus

Feel-Dry sèche-chaussures Feel-Dry Comfort technology pour la vie de tous les jour et le sport. Sèche vos chaussures et combat les odeurs. Convient pour toutes chaussures, bottes et gants de la taille 31 - 48 En savoir plus

Replacement discs for Katana and Vice bindings - diameter 82 mm - sold per set (2 pcs) En savoir plus

Spare part two way strap (wear as cap strap or standard). The clamp or the inside is mounted, the ratchet is not included. Screw insert for ratchet is mounted in the strap, the screw itself not. Fits most Nitro bindings. Older Nitro bindings have a clip size that is lower and smaller. New straps on clip side will not fit properly. Our cable toe strap S-curve fit this one. - Size L - Sold in set (left and right) - Ratchet clip-screw distance 2 cm (ratchets have distance 2 and 2.5 cm. check your binding before ordering!) - Clip height: high - fits toe cable strap S-curve 19134 NB. Not all Nitro toe ratchets fit the Vibam strap. Watch carefully the measurements on the additional pictures that show you which Nitro Strap fits. If yours is different you have to order new toe ratchets as well (Caer art code 18078) En savoir plus